CMDLearn

Learn

CBSE Class 12 Chemistry sample paper 2026-27 (code 043), section by section: marks by unit and how answers are marked

CMDLearn ·

CBSE has published the Class 12 Chemistry (code 043) sample paper for 2026-27 with its marking scheme. This guide goes through the paper: the layout, which unit each question comes from, where the choices are, how the marking scheme gives marks, and three answers worked the way the marking scheme works them. The numbers are from CBSE's own documents, linked at the end with page numbers, which are PDF pages. The questions are described in our own words, and the placing of each question under a unit is our reading.

Download the paper and its marking scheme first and keep them open: Chemistry sample paper and Chemistry marking scheme. CBSE's Class XII sample paper page also lists a Hindi version of both.

The paper at a glance

From the general instructions on page 1 of the sample paper:

SectionQuestionsTypeMarks eachSection totalInternal choice
AQ1 to Q1612 multiple choice, then 4 assertion-reason116None
BQ17 to Q21Very short answer210Q17
CQ22 to Q28Short answer321Q27
DQ29 to Q30Case-based, parts worth 1, 1 and 248In the 2-mark part of each
EQ31 to Q33Long answer515Q31, Q32, Q33
Total3370

Where the marks come from, unit by unit

The curriculum gives the theory unit marks: Solutions 7, Electrochemistry 9, Chemical Kinetics 7, d- and f-Block Elements 7, Coordination Compounds 7, Haloalkanes and Haloarenes 6, Alcohols, Phenols and Ethers 6, Aldehydes, Ketones and Carboxylic Acids 8, Amines 6 and Biomolecules 7, 70 in all (curriculum, PDF page 8). The curriculum also says no chapter-wise weightage is given and every chapter must be covered (PDF page 15). The sample paper does not label units. This table is our reading of the paper, placing each question in the unit that teaches it.

UnitQuestionsMarks in this paperCurriculum unit marks
1 SolutionsQ5; Q25; Q281 + 3 + 3 = 77
2 ElectrochemistryQ3, Q12; Q21; Q332 + 2 + 5 = 99
3 Chemical KineticsQ6, Q11; Q18; Q232 + 2 + 3 = 77
4 d- and f-Block ElementsQ9, Q14; Q17; Q222 + 2 + 3 = 77
5 Coordination CompoundsQ2, Q16; Q322 + 5 = 77
6 Haloalkanes and HaloarenesQ10; Q20; Q271 + 2 + 3 = 66
7 Alcohols, Phenols and EthersQ8, Q15; Q292 + 4 = 66
8 Aldehydes, Ketones and Carboxylic AcidsQ24; Q313 + 5 = 88
9 AminesQ1, Q4, Q13; Q263 + 3 = 66
10 BiomoleculesQ7; Q19; Q301 + 2 + 4 = 77
7070

One placement is a judgement call. Q8 asks which Grignard reagent and carbonyl compound give a tertiary alcohol, which is taught both as a way to make alcohols and as an addition reaction of carbonyl compounds. We count it with Alcohols, Phenols and Ethers, which makes every unit total in this paper match the curriculum. Counted with Aldehydes and Ketones, those units would be 5 and 9. One sample paper is one spread of questions; the board paper can distribute its questions differently.

Section by section

Section A, Q1 to Q16 (pages 1-4). Sixteen one-mark questions with no choice. The twelve multiple-choice questions cover: telling primary, secondary and tertiary amines apart from boiling points and basic strength (Q1); the shape of a nickel complex (Q2); the charge needed to get a metal from its oxide (Q3); a test that gives a foul smell (Q4); gas solubility under pressure (Q5); the order of a hydrolysis reaction (Q6); an amino acid (Q7); making a tertiary alcohol from a Grignard reagent (Q8); a strong oxidising agent among four metals in the +3 state (Q9); substitution with a change in optical rotation (Q10); half-life (Q11); and which solution conducts best (Q12). The four assertion-reason items are on nitration of aniline (Q13), the shape of permanganate and manganate ions (Q14), how well ethers mix with water (Q15) and a cobalt complex's magnetism (Q16).

Section B, Q17 to Q21 (pages 4-5). Two marks each. Q17 is a choice of two transition-metal pairs (balancing a redox reaction and explaining a property). Q18 asks whether a reaction's rate can stay constant, Q19 is on DNA bases and what lemon juice does to the protein in milk, Q20 on which substituent makes chlorobenzene react more readily, and Q21 on protecting iron pipes and the reactions at each electrode when molten magnesium chloride is electrolysed.

Section C, Q22 to Q28 (pages 5-8). Three marks each. Q22 is on magnetic moment and why iron suits two jobs, Q23 activation energy from a graph of log k against 1/T, Q24 three name reactions to identify and complete, Q25 non-ideal mixing and a parts-per-million calculation, Q26 two conversions and why aniline is acetylated first, Q27 a choice of two haloalkane questions (naming, and which product forms or which compound hydrolyses faster), and Q28 lowering of vapour pressure and a mixture that cannot be separated by distillation.

Section D, Q29 to Q30 (pages 8-10). Case-based questions of 4 marks, each in parts of 1, 1 and 2 marks, with a choice in the 2-mark part. Q29 is about how substituents change the acidity of phenols, read from a graph of pKa values. Q30 is about identifying a carbohydrate from a plant extract from the results of tests.

Section E, Q31 to Q33 (pages 10-12). Five marks each, every one with an A or B choice. Q31 is on aldehydes and ketones (explaining reaction conditions and a reagent test, or ordering compounds by a property and finding isomers that pass Tollens' test). Q32 is five short questions on coordination compounds. Q33 is on electrochemistry (cell EMF from experimental data with the Nernst equation, the units of molar conductivity and a lead storage battery; or molar conductivity at infinite dilution and a hydrogen-oxygen fuel cell).

Three answers worked as the marking scheme works them

These follow the official marking scheme only, step for step; the wording of the steps is ours.

Q11 (1 mark), half-life. A first-order reaction has a half-life of 16 minutes; how long until 75% has reacted? The marking scheme's answer is option B, 32 minutes: after 16 minutes half has reacted, and in the next 16 minutes half of what is left reacts, so 50% + 25% = 75% is done in 32 minutes (marking scheme, page 2).

Q23 (3 marks), activation energy from a graph. The marking scheme starts from log k = log A − Ea / 2.303RT, so the slope of log k against 1/T is −Ea / 2.303R (½ mark each for the two lines). From two points of the table it finds the slope: (−4.46 − (−3.91)) / (0.00333 − 0.00323) = −5500 (1 mark), and notes that the slope can come out slightly different with other points. Then Ea = 5500 × 2.303 × 8.314 = 105.31 kJ mol⁻¹, with ½ mark for the value and ½ for the correct unit (marking scheme, pages 4-5). One thing to know: the version for visually impaired candidates gives a slope of −4250 K in the sample paper (page 6), but the marking scheme works that version with 4500 and gets 86.16 kJ mol⁻¹ (page 5). With −4250 the same steps give about 81.4 kJ mol⁻¹. Ask your teacher which to follow.

Q25 (II) (1 mark), parts per million. Sea water has a mass of 1030 g per litre, with about 6 × 10⁻³ g of dissolved oxygen in it. The marking scheme writes ppm = (mass of oxygen ÷ total mass) × 10⁶ (½ mark), which gives (6 × 10⁻³ ÷ 1030) × 10⁶ = 5.8 ppm (½ mark) (marking scheme, page 6).

How the marking scheme marks answers

How to use it

  1. Sit the paper timed, in three hours, without a calculator or log tables.
  2. Mark yourself with the marking scheme's steps, not just the final answers, so you see where the half marks come from.
  3. Use the unit table above to see what the paper tests, but revise every unit: the curriculum gives no chapter weightage and the board paper is not this paper.
  4. Practise the calculation types that come up here (half-life, Arrhenius plots, ppm, vapour pressure, the Nernst equation) without a calculator.

If you use a chatbot to check your answers, use it to explain a step, not to write the answer for you: our guide on using ChatGPT for homework without cheating shows how.

FAQ

Has CBSE released the Class 12 Chemistry sample paper for 2026-27? Yes. The Chemistry (code 043) sample paper and its marking scheme are on CBSE's Class XII sample paper page, with Hindi versions of both.

How many questions and marks are in the Chemistry paper? 33 questions for 70 marks in 3 hours, in five sections: A (16 one-mark questions), B (5 two-mark), C (7 three-mark), D (2 case-based questions of 4 marks) and E (3 long answers of 5 marks) (sample paper, page 1).

Can I use a calculator or log tables? No. The instructions say log tables and calculators are not allowed (sample paper, page 1).

Is there chapter-wise weightage for Class 12 Chemistry? The curriculum gives unit marks (for example Electrochemistry 9, Aldehydes, Ketones and Carboxylic Acids 8) but says no chapter-wise weightage is provided and all chapters must be covered (curriculum, PDF pages 8 and 15).

How are the other 30 marks given? In the practical examination: volumetric analysis 8, salt analysis 8, a content-based experiment 6, project work 4, and class record and viva 4 (curriculum, PDF page 10).

Other sample papers

Where CMDLearn fits

CMDLearn is building an AI teaching centre for every age: a realistic AI teacher who teaches through lessons, games and chat on a phone, tablet or laptop. Classes are opening step by step, starting with younger students; it does not teach Class 12 yet, and no student uses it yet. Class 12 students can join the waitlist today to hear when their classes open.

Try a question from this paper with Asha, our free AI tutor demo. It runs on a free server, so it may take up to a minute to wake up.

Sources

All opened and read on 11 November 2026. Page numbers are PDF pages.

Every number and rule on this page is from the documents above. The placing of questions under units, the summaries and the FAQ wording are ours. Always follow your school and the official CBSE notices.

Try the free AI tutor chat (Classes 1 to 10 for now), or join the waitlist.